3/28/2023 0 Comments Becm syncmateIf you are unsure if you have a GEMS Engine/ECU you can check the following: This Unit is totally Self-Contained - No Computer, Cables or Software Needed. This unit is specifically designed to ensure the vehicle immobiliser codes are in sync with the main vehicle computer, it is NOT designed to fix any other problems with your engine immobiliser or your vehicle alarm and security systems. **Picture for illustration only, actual colour of label is blue** * Please Note: there are three versions of the BeCM Sync-Mate available, please make sure you order the correct version as they are not interchangeable * Finally it could also inform you that there has been a communication error - in which case it will then also tell you the cause of that error. With intelligent use of a high intensity flashing LED, the BeCM Sync-Mate will inform the user that the BeCM: Is already synchronised, or it is has been re-synchronised. When it has finished working, it lets you know what it has done. No fuss, no palaver and more importantly, no costly call out fee just for two minutes work. To re-synchronise your BeCM, you simply plug the BeCM Sync-Mate in and it resets the BeCM for you. Now within minutes your BeCM will be automatically resynchronised with the engine management system and if this is the problem causing your Range Rover not to start then you will be on your way with this neat little gadget. Finally it could also inform you that there has been a communication error - in which case it will then also tell you the cause of that error.The BeCM Sync-Mate solves an increasingly common problem of P38 Range Rovers being left stranded because the BeCM, in effect, forgets the immobiliser code it needs send to the EMS (engine management system) for it to start the engine. Within a minute your BeCM will be automatically resynchronised with the engine management system and you will be on your way. Availiable for all three Engine Management types (Click Here for help to identify yours). Six months down the line after you have bought your replacement BeCM you could still find yourself with the same problem, and although the Part would be under warranty, you are still stuck.īut now there is a third way! The BeCM Sync-Mate. However they do not always replace the memory part of the unit if it is still appears to be working satisfactorily. To cut costs, we have heard that the manufacturer is now providing only exchange re-furbished BeCMs. As time goes on, this method appears not to always totally fix the fault. The second way is to fit a new BeCM which will cost about ?600 including programming and fitting. This will fix the problem until the next time. Previously when this happened, there used to be only two ways to get moving again: The first was to call out a garage with a diagnostic tool, like our Faultmate MSV-2, to reset the system and then pay the mechanic a "call out" fee for approximately 2 minutes work. The BeCM Sync-Mate solves an increasingly common problem of P38 Range Rovers (95 to 2002) being left stranded because the BeCM, in effect, forgets the immobiliser code it needs send to the EMS (engine management system) for it to start the engine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |